DC Audio 250.4

Buy Now

Amplifier Description

The 250.4 competition series amplifier is a Monster Class D 4 Channel Amplifier Delivering 250 watts per channel @ 4 ohms / 400 watts x 4 @ 2 ohms per channel or 850 watts x2 @ 4 ohms bridged. It is not 1 ohm stable.

Running it under 2 ohms per channel or above 16.0 volts will cause amp failure and void your warranty.

Output Power (RMS)

4 ohm 250Wx4 @ 14.4 Volts

2 ohm 400Wx4 @ 14.4 Volts

4 ohm mono 850Wx2 @ 14.4 Volts

1700 watts total power

DO NOT CHARGE OVER 16.0 VDC

DO NOT RUN UNDER 2 ohm Per channel

Key Features

Variable high pass filter with X10 option

Variable low pass filter with X10 option

Bandpass Filter Capable

8awg Speaker Connections

1/0 awg inputs

Tiffany RCA Jacks

Class D

8-16.0 Volts Operations

Remote Control with Clipping LED’s

Heatsink Clipping LED’s for Channels 1&2 / 3&4

AMP SPECS:

    DC Amp Model:
    250.4
  
    Input Sensitivity
    6V~0.2V
  
    Working Voltage
    8vdc-16.0vdc
  
    12dB / Octave Crossover
    YES
  
    High Pass
    20(200)Hz - 800(8K)Hz, x10 muliply
  
    Low Pass
    50(500)Hz - 800(8K)Hz, x10 muliply
  
    Crossover Selector Switch
    HPF / FULL / LP / BP
  
    Remote Control
    Yes with Clipping Led
  
    Signal to Noise Ratio
    dB95
  
    Damping Factor
    130<
  
    THD @ 4ohms
    Less than 0.1%
  
    Fuse Rating
    External 200 amp
  
    LED Status Lights
    Power/Protect/Clipping
  
    Heatsink Length
    13.78"/350mm
  
    Heatsink Width
    9.38"/66mm
  
    Heatsink Heigth
    2.35"/59.6mm