DC Audio 5.0k
Amplifier Description
The 5.0kw competition series amplifier is a 5,000 watt mono block. It is capable of running up to 18 volts for up to 7,300 watts. It is a linkable amp and designed to run a 1 ohm per amp or 2 ohms when strapped.
It comes with a bass knob and a clipping indicator. For power inputs it will accept dual 0 awg for power and dual 0 awg for ground.
Output Power (RMS)
4 ohm 900Wx1 @ 14.4 Volts
2 ohm 2300Wx1 @ 14.4 Volts
1 ohm mono 5000x1 @ 14.4 Volts
1 ohm mono 6000x1 @ 16.0 Volts
1 ohm mono 7300x1 @ 18.0 Volts
Key Features
• 1 ohm stable
• Variable low pass filter
• Variable subsonic filter
• Variable bass boost
• Wired Bass Knob remote control W/ Clip light
• RCA Pass Thru
• Linkable
• Dual 0 Awg Power Ground Inputs
Recommended for installation :
Upgraded Alternator or 250 amps of charging power
Upgraded under hood Battery
650ah of AGM Batteries in the trunk or 80ah Lithium
Dash mounted voltage meter
0 Awg OFC power and ground
Power & ground runs from front to back batteries.
DO NOT mount to subwoofer box. (will void warranty)
AMP SPECS:
DC Amp Model: | 5.0k |
---|---|
Input Sensitivity | 6V~0.2V |
Frequency Response | 20Hz~250Hz |
24dB / Octave Crossover | YES |
Low Pass | 35Hz ~ 250Hz |
Subsonic Filter | 10Hz-50hz |
Bass Boost @45hz | 0 ~ 9db |
Phase Shift | 0 ~ 180 |
Remote Control | Yes |
Clip Indicator | Yes |
Signal to Noise Ratio | dB100 |
Damping Factor | 200< |
THD @ 4ohms | Less than 0.1% |
Fuse Rating | External 500 amp |
LED Status Lights | Power and Protect |
Master/Slave | YES |
Heatsink Length | 25.596"/650mm |
Heatsink Width | 9.38"/66mm |
Heatsink Height | 2.35"/59.6mm |
Overview Video
Check out what the 5.0k Amplifier from DC Audio is all about